7 Signs Your Patio Needs More Than a Simple Hose Down
A quick rinse removes loose dust and leaves, but it rarely shifts embedded grime, slippery growth or stubborn stains. Melbourne’s damp winter conditions, shaded courtyards and seasonal leaf fall can all contribute to patio problems. Knowing what you are looking at helps you choose between targeted cleaning, professional treatment and repairs.
These seven signs suggest your patio needs more attention than a garden hose can provide.
1. The Surface Feels Slippery When Wet
A slippery patio can indicate algae or other biological growth, particularly around shaded walls, garden beds and poorly drained areas. The surface may feel slick even when there is little visible discolouration.
What to do: Restrict access to slippery sections, sweep away organic debris and check for persistent moisture. Use a treatment labelled for your paving material, following its application and rinsing instructions. Cleaning without addressing shade, leaking irrigation or drainage problems often allows growth to return.
2. Green or Black Patches Remain After Rinsing
Algae, lichen and other surface growth can cling firmly to concrete, brick and stone. However, colour alone does not identify the cause: black marks may also come from dirt, pollution or other staining.
What to do: Test a suitable cleaner on an inconspicuous section before treating the whole patio. Avoid aggressive wire brushing on delicate surfaces. Persistent or widespread patches are a reason to seek professional assessment rather than repeatedly increasing cleaning pressure.
3. Oil, Rust or Food Stains Have Soaked In
Barbecue grease, metal furniture and fallen leaves can leave stains that water alone cannot remove. Porous materials, including unsealed concrete and some natural stones, absorb spills readily.
What to do: Blot fresh grease rather than spreading it with water. Choose a stain-specific product that is compatible with the surface; some absorbed stains may need a poultice treatment. Do not use acidic rust removers on marble, limestone or other acid-sensitive materials. Never mix cleaning chemicals.
4. White, Powdery Deposits Keep Returning
White deposits on masonry or paving may be efflorescence: salts carried to the surface by moisture and left behind as it evaporates. A rinse may temporarily hide the residue without addressing why it keeps appearing.
What to do: Once the surface is dry, try gentle dry brushing and collect the residue. Check for irrigation overspray, pooling water and nearby leaks. Recurring deposits warrant investigation before sealing, because trapped moisture can contribute to further problems. Avoid treating unidentified white marks with acid.

5. Weeds and Moss Are Taking Over the Joints
Growth between pavers can indicate accumulated soil, damp conditions or depleted jointing material. A hose may wash away loose debris, but it will not reliably remove established roots or restore damaged joints.
What to do: Remove weeds carefully and inspect the joints https://melbournepressurecleaningpros.com.au/house-washing/ afterwards. Replace missing jointing material with a product suited to the paving system. Excessive pressure washing can strip jointing sand and undermine paving stability, so nozzle choice and technique matter.
6. Water Pools or Pavers Move Underfoot
Persistent puddles, rocking pavers and uneven edges point to issues beyond surface dirt. Possible causes include blocked drainage, settlement, root movement or problems with the paving base.
What to do: Clear accessible surface drainage grates and observe where water collects after rain. Do not assume cleaning will correct a drainage or structural fault. Loose paving, significant trip hazards and water collecting against the house need assessment by an appropriate paving or drainage professional.
7. The Surface Is Flaking, Cracking or Unevenly Sealed
Peeling coatings, crumbling concrete, loose grout and widening cracks are signs to stop and assess before cleaning. High pressure can worsen weak surfaces. Patchy colour or uneven water absorption may suggest sealer wear, but neither is a reliable diagnosis on its own.
What to do: Identify the material and any existing coating before choosing a treatment. Repair defects first, and only consider resealing once the surface is suitably clean, dry and compatible with the proposed product. Not every patio requires a sealer.

Choosing the Right Patio Cleaning Approach in Melbourne
The safest method depends on whether your patio is concrete, brick, porcelain, natural stone or another material. Higher pressure is not automatically more effective: it can etch surfaces, damage coatings and remove jointing material.
Before booking a Melbourne patio cleaning service, ask how the contractor identifies the surface, tests treatments and manages wastewater. Cleaning runoff containing chemicals, sediment or oil should not enter stormwater drains. Check current requirements with your water retailer and local council where relevant.

The key is to treat the cause, not just the visible dirt. Targeted cleaning can improve appearance and reduce slippery buildup, while drainage work, joint repairs or surface restoration may be necessary for a lasting result.
Melbourne Pressure Cleaning Pros
(03) 8007 3103